GE Completes World’s First DLN1.0+ with Ultra Low NOx Combustion Upgrade on Nine GE 9E Gas Turbines at Five Power Generation Enterprises in China

·       The Project Supports the Shenzhen Municipal Government’s “Blue Sky” Air Quality and Public Health Improvement Plan

·       GE’s Innovative Upgrade Reduced NOx Emissions from 50mg/m3 (about 25 ppm) to 15mg/m3 (about 7.5 ppm) to Help Five Power Generation Enterprises Meet “Blue Sky” Campaign’s Requirements in Record Time

·       Project Marks First Installation of GE’s DLN1.0+ with Ultra Low NOx Upgrade on the 9E Fleet and Serves as a Model for Nearly 700 Units in Operation around the World

·      Industry Leading DLN1.0+ with Ultra Low NOSolution Can Reduce NOx down to 5ppm 

BADEN, SWITZERLAND—April 11, 2019—Helping to improve air quality and public health throughout China by reducing nitrogen oxide (NOx) emissions, GE (NYSE: GE) today announced that it has successfully completed the world’s first installation of its DLN1.0+ with Ultra Low NOx combustion upgrade on nine GE 9E gas turbines at five power generation enterprises (Shenzhen Nanshan Power Corporation, Shenzhen New Power Corporation, Shenzhen Datang Baochang Gas Power Generation Co. Ltd., Shenzhen Yuhu Power Co. Ltd., and CNOOC Shenzhen Power Co. Ltd.) in Shenzhen. GE unveiled the announcement during the “Shenzhen Blue Sky” DLN1.0+ Retrofit Project Completion Celebration Event it co-hosted with Shenzhen Municipal Ecology and Environment Bureau and Shenzhen Nanshan Power Corporation. More than 100 power plant operators attended the event.

“Power generation companies are currently facing dual pressure from environmental indicators and economic performance,” said Liang Jianqiang, Head of Shenzhen Nanshan Power Plant. “We continue to search for a two-way solution to help contribute to local blue skies while improving asset performance. GE’s DLN 1.0+ Ultra Low NOx combustion upgrade is a perfect fit for our needs. Through this cooperation, GE has not only confirmed its technological advantage, but also demonstrated its excellent capabilities in execution. With the help of GE, we have succeeded in upgrading our plants while maintaining a steady supply of energy.”

This upgrade reduces NOx emissions from 50mg/m3 (about 25ppm) to 15mg/m3 (about 7.5ppm), thus contributing to Shenzhen Municipal Government’s “Blue Sky” campaign, which requires all gas-fired power plants in the city to lower its emissions below 15mg/m³ in six months. NOx is a contributor to ground level ozone and reductions in emissions helps improve air quality and public health by making it easier to breathe.  Power plants that fail to comply with these requirements will be taken offline.

“We admire the Shenzhen Municipal Government’s adherence to greener and low-carbon development and the efforts to improve the living standards of their citizens,” said Yang Dan, CEO of GE Power China. “GE’s DLN1.0+ with Ultra Low NOx reduced emissions and is contributing to the Shenzhen Municipal Government’s ‘Blue Sky’ sustainability plan to improve air quality. The successful modernization of nine gas turbines – in a record time of less than six months – provides a reference for many 9E units to repower and adapt to the needs of the new era. GE is proud to bring a real contribution to the ‘blue sky’ battle, and we hope to continue cooperating with more provinces and cities in the future.”

Completed on time, the project mobilized more than 200 experts from China and around the world for factory repairs to meet specific timeframe requirements and exceeded performance expectations. This milestone serves as a model for plant operators that are operating more mature gas turbine fleets in China and around the globe.

Breakthrough technology reduces NOx emissions down to 5ppm

NOx emissions produced in the combustion system increase with the temperature of the flame. A flame with a lower temperature will produce less NOx, and the key is to be able to mix air and fuel together prior to burning. GE’s DLN 1.0+ with Ultra Low NOx upgrade is an improved combustion system for the DLN 1.0 that can reduce NOx down to 5 ppm.

The new configuration includes:
– more robust materials and improved thermal barrier coatings to extend maintenance interval and parts life;
– new premix hole distribution panel in the liner headend, relocated dilution holes to transition piece, and designed new secondary fuel nozzle to improve the mixing of air with fuel and achieve industry leading emissions targets;
– combustion dynamics monitoring system and improved controls system using “Corrected Parameter Control (CPC)”, an advanced controls feature using real time information, such as ambient humidity, ambient temperature, inlet and  exhaust pressure losses to adjust the fuel splits between the primary and secondary fuel circuit, and maintain the emissions below the target.

In addition, the upgrade allows the units to accept fuels with larger Wobbe index fluctuations, expanding gas source choices and helping the units to operate flexibly. The upgrade can potentially extend combustion system maintenance intervals to 32,000 hours or 1,300 starts and stops (equivalent to four consecutive years of stable operation), reduce maintenance costs, increase operational flexibility, and extend the life span of related equipment.

DLN 1.0+ with Ultra Low NOx is based on GE’s 43 million hours of operating experience and advanced combustion technology for its B -class and E-class fleet of gas turbines. It marks a big potential not only for the nearly 700 GE 9E turbines but also for approximately 1,000 GE 6B gas turbines operating around the world that combined can generate around 120 gigawatts, which is roughly equivalent to powering the entire grid of Italy.

Latest E&P Jobs

Job Function: Engineering/Technology Experience Level: Experienced Posted Date: 10/26/2018 1:55:43 PM Job #: 3196758 Location(s): Poland; Warsaw Role Summary: The Design Engineer will be an integral part of the Manifold team that is technical responsible for defining, developing and delivering subsea manifold systems to the clients. The Design group have the responsibility for engineering design activities for structures, piping, jumpers
CSE ICON Our Passion For What We Do Transfers Into Our Services Job Description: Hadoop Architect/Developer with hands on experience in designing and developing big data solutions. The candidate will be a part of  advanced analytics group of CSE ICON. Advanced analytics team is building innovative analytical solutions for Oil & Gas Upstream, Electric Utility and Oil & Gas Midstream
GE Oil & Gas Experienced Posted 10/2/2018 6:54:31 AM 3184614 Job Function: Engineering/Technology Business Segment: Oil & Gas Measurement & Controls Location(s): Ireland; Shannon Role Summary:This Lead Project Engineering role is a new permanent opportunity based in GE Sensing EMEA, Shannon which is part of the Baker Hughes a GE company (BHGE) business. Essential Responsibilities:• Working as part of the

Oil & Gas Job Locations

April 2019
« Mar   May »